 |
A customized V1 character with new joint parameters,
added face and body morphs, an expressions library, and a face texture
or two. Required for full use of any of the Vicky characters on this
page.
Requires: Vicky 1 or 2 by DAZ MultiVic.zip (3.09 MB)
|
|||
|
||||
 |
 |
Four versions of Batgirl: Yvonne Craig TV,
Alex Ross poster, 90's Batman Adventures, Silver Age comic. The set
includes a conforming suit with built-in gloves and boots, a combination
conforming/clothroom cape, and a conforming hairfigure with EasyPose posing
and a "gravity" system, which uses Point At. A geom-swapping 3-in-1
belt, a mask with quite a few shaping morphs, and a large libray of MATMOR
files are also included. Also includes a 3D Batgirl logo, in the
style of the logo seen in the 1967 TV pilot episode.
Requires: P4 Female Catsuit, P4 NudeWoman
|
||
 |
 |
File Dependencies: MultiVic.zip,
MultiVic_textures.zip, general_textures.zip, utility_poses.zip
Batgirl.zip (1.88 MB. Includes
cape)
RTEncoder required to decode OBJ files. |
||
|
||||
 |
 |
Everyone's favorite Spandex Duo. Characters
based on the Vicky 1 catsuit. Both characters included, with props
and textures. Gloves and boots are built into the suit. Electracomps,
capes, belts, and ElectraWoman and DynaGirl 3D logos are included.
Requires: P4 NudeWoman, P4 Woman's boots, Vicky 1 catsuit File Dependencies: MultiVic.zip, MultiVic_textures.zip, MultiHair.zip, Dynagirl_hair.zip, general_textures.zip, utility_poses.zip RTEncoder required to decode OBJ files. |
||
|
||||
 |
 |
Two versions of Catwoman: a Julie Newmar/Lee
Meriwether/Eartha Kitt version and a 90's comic version. Uses the
Batgirl suit. Includes belt, necklace, mask, and cat ear props. Includes
geom-swapping claws on the gloves. TV version uses the MultiHair
(below). Comic version uses the Batgirl hair and mask and the EZ
Pose Cat Tail (also below).
It has come to my attention that the comic version is not really accurate. Oh, well. File Dependencies: MultiVic.zip, MultiVic_textures.zip, general_textures.zip, utility_poses.zip, MultiHair.zip, Batgirl.zip, Batgirl_suit.zip, Batgirl_hair.zip, EZPose_cat_tail.zip |
||
|
||||
 |
Season 1 TV version Wonder Woman, with a completely
new suit mesh and textures. The suit is a conforming figure, but
the suit bottom is clothroom cloth. The headband and wristlets are
built into the suit. This figure uses the MultiHair, which is available
below.
File Dependencies: MultiVic.zip, MultiVic_textures.zip, general_textures.zip, utility_poses.zip, MultiHair.zip |
|||
|
||||
 |
Silver Age-style Supergirl, for those who revile
the Crisis on Infinite Earths and all it stood for. :) Uses
the EWDG suit and props. Also uses the MultiHair (below). Includes
belt prop and skirt prop with pre-set clothroom settings.
File Dependencies: MultiVic.zip, MultiVic_textures.zip, general_textures.zip, utility_poses.zip, EWDG.zip, MultiHair.zip |
|||
|
||||
 |
Hawkgirl uses the ERCJP Wingset and the EWDG
suit. Mace prop and hawk mask included. Uses the Batgirl hair
(available above).
File Dependencies: MultiVic.zip, MultiVic_textures.zip, general_textures.zip, utility_poses.zip, EWDG.zip, Batgirl_hair.zip, ERCJPWingset.zip |
|||
|
||||
 |
A six-in-one conforming hair figure for MultiVic.
Uses geom insertion poses to switch geometry as well as materials.
Includes hair for Catwoman, ElectraWoman, Supergirl, and Wonder Woman.
Figure setup uses a Point At "gravity" system, like the other hairsets
on this site. My hair geometries and textures are probably a bit
limited for the tastes of some. The basic figure may be extensible
for use with any static hair prop. See the "master readme" (above)
for more information.
File Dependencies: general_textures.zip, utility_poses.zip |
|||
|
||||
 |
Conforming hair figure which uses ERC, body
handles, and Point At to create gravity effects and facilitate posing.
I'm not sure whether these are supposed to be called "dog ears" or "puppy
tails", or what, but I'm told they aren't pigtails. So I've named
them for the character who wears them. These are intended for use
with the MultiVic Dynagirl character, but a Python cr2 is included which
will convert them for standard Vicky 1 or 2 use. Current version
has been updated to allow EZPose poses to be saved to the the pose library
(see the "master readme" at the top of this page for details).
File Dependencies: general_textures.zip, utility_poses.zip |
|||
|
||||
 |
EasyPose conforming pigtails for Vicky 1 or
2. These use Point At to fake gravity and aid posing, like the other
hairsets on this site. Current version has been updated to allow
EZPose poses to be saved to the the pose library (see the "master readme"
at the top of this page for details). A Python .cr2, to convert
this hair for use with MultiVic, is included with the Diapergirl download,
below.
File Dependencies: NONE AS SEEN ON RENDEROSITY.COM! :) |
|||
|
||||
 |
 |
A combination conforming/clothroom garment
designed for use with MultiVic. This download includes a Python script
cr2 which will automatically convert the diaper for use with the P4 demon
baby! Does Creepy Clown stand a chance against his dreaded nemesis
re-clad? Or something.... Includes versions for MultiVic, Vicky
1 or 2, and demon baby.
File Dependencies: general_textures.zip, utility_poses.zip |
||
|
||||
 |
A slightly clownish, somewhat bizarre combination
conforming garment and clothroom garment, designed for MultiVic.
The suit is an all-new mesh. Rubber booties, plastic pants, and a
rubber bikini top. The suit bottom can swap morphs with the suit
bottom from the Wonder Woman suit. Includes Python script cr2 to
automatically convert for use with standard Vicky1 or 2. Includes
two simple textures. Also includes a pacifier prop on a string, a
rubber baby bonnet for Vicky, and a bib. Whacky, eh?
File Dependencies: general_textures.zip, utility_poses.zip |
|||
|
||||
 |
What happens when MultiVic dons the diaper,
ABY suit, and pigtail hair. Diapergirl is a goofy Batgirl villainess,
maybe. One day you'll read about her at the Batgirl Bat-Trap, if
you follow such things. Consider that a warning. :) The
"adult baby" props and garments were created for this character.
A Python script .cr2 is included which will automatically convert the pigtail
hair for use with MultiVic.
File Dependencies: MultiVic.zip, MultiVic_textures.zip, general_textures.zip, utility_poses.zip, diaper_figure.zip, ABY_suit.zip, Pigtail_Hair.zip |
|||
|
||||
 |
A simple cat-tail figure which uses the EasyPose
posing system. This is used by the comic version of Catwoman, available
above. This EasyPose figure has not been configured to allow
poses to be saved to the pose library.
File Dependencies: NONE |
|||
|
||||
 |
Poseable set of wings which uses ERC and body
handles to provide flexible, if not necessarily intuitive, posing.
The feathers still "scrunch and stretch", but, hey: they're free wings!
:) Some free textures for these are avaible at Renderosity.
(Mine aren't so hot, unfortunately.) Current version is updated
to allow ERC poses to be saved to the pose library!
File Dependencies: NONE AS SEEN ON RENDEROSITY.COM! :) |
|||
|
||||
 |
A vaguely creepy poseable teddy bear for Poser.
The fur looks halfway decent with displacement rendering. The eyes
take Vicky 1 eye textures. This file will look for one of the head
textures posted with MultiVic, for its eye materials.
File Dependencies: MultiVic_textures.zip |
|||
|
||||
 |
Why did I make a poseable slug for Poser, you
ask? I'm not sure, myself, but you can have a copy if you want it.
Uses all procedural texturing. Has some simple ERC linking to create
an easy "slithering" effect. Provide your own slime.
File Dependencies: NONE |
|||
|
||||
 |
An Adam West Batman mask and belt and a Killer
Moth helmet and cocoon gun. Killer Moth was the Silver Age "Underworld
Batman", and the closest thing Batgirl had to a nemesis of her own, in
the late 70's. The helmet and gun are as seen on the cover of Batman
Family # 10, and probably nowhere else. The Batman mask and belt
require no textures. Details are built into the mesh, although the
mesh may be a bit low res for some.
File Dependencies: NONE |
|||
|
||||
 |
A conforming plastic bag for V1 MultiVic.
Built-in hair, designed for use with the Batgirl character. May be
useful to someone as a cloth hood or something, perhaps. The bag
has a wide range of inflate and deflate morphs and includes two warning
textures. Suitable for scenes of dire peril.
File Dependencies: general_textures.zip (for hair) |
|||
|
||||
 |
A Poser version of the cult favorite 80's comic
book mysteryman. Ut! Based on the P4NudeMan and his clothes.
Includes a poseable mask with carrot texture. Procedural P5 fire
shader. Sorry, no nuclear-powered super pogo. :(
Requirements: P4 male geometries (ship with all versions of Poser 4+) File Dependencies: NONE Objaction Mover required to decode OBJ file. |
|||
|
||||
 |
Yes, this is a Micronaut! Microtron is
based on the 1977 Mego toy, on which the Marvel Comics character was also
based. The figure has parented magnets which enable working rubberized
tank treads. This was my first model in Wings 3D. (Funny: I
had Nendo for two years before Wings came along, but I couldn't do a thing
with it. Somehow Wings clicked for me. Yeah, yeah, whaddayoo
care, right?) :)
File Dependencies: NONE |
|||
|
||||
 |
Compresses and de-compresses Poser files.
Programmed in Python. Adaptation of Tromnek's edit of the compression
scripts included with Poser 5. Can be used with other G-zipped files,
as well. I use it for Paint Shop Pro and Game Maker backups.
The PoserPython script version, below, can be run within Poser. (There is another file compression utility for Poser called Poser Compressor, by Dimension 3D. It is available in the Renderosity FreeStuff and is generally more accessible, flexible, and efficient than this one. It is also a much smaller download. The program seen here allows some additional flexibility with a recursive file search, which is currently the only benefit not offered by the D3D file. Generally, I recommend Dimension 3D's program.) .exe version (2.75 MB Compiled
with Py2Exe)
|
|||
|
||||
 |
Click thumbnail for more information! | Adaptation of the old 1978 Atari 2600 game,
programmed using Game Maker 5.2. Expanded to include (most of) Indenture,
the old DOS adaptation of Adventure. A level editor is also available.
Thoroughly de-bugged and loaded with "cheat" options.
Windows Only. More information here. |
||